• Общие
  • Цвет
  • Каталог
НАСТРОЙКИ РЕШЕНИЯ
Настройки цветовой схемы
Цветовая схема
Общие настройки
Вид главной страницы
Скрыть баннер на внутренних страницах
Расположение телефона
Расположение корзины
Тип меню
Использовать широкое меню
Расположение главного меню
Использовать широкую шапку
Включить кнопку наверх
Использовать адаптивность
Параметры каталога
Вид списка разделов в каталоге товаров
Вид списка товаров в каталоге товаров по умолчанию
Вид карточки товара
Узкая карточка товара
Отображать сокращенные характеристики в карточке
Вид SKU карточки
Эффект просмотра изображения в карточке товара
Вид карточки услуги
Вид списка категорий каталога услуг по умолчанию
Вид списка услуг по умолчанию
+7 812 363-14-09
+7 812 575-06-09
Заказать звонок
Меню

Компания Компания Каталог Каталог Помощь Помощь Контакты Контакты

Конвертер +7~30V / ATX ( 150 W ), –40C ~ +85C

Артикул: ADLPS35-150
FEATURES
Small 2”x4” (50mm x 102mm) Footprint
Chassis and PC/104 Mounting Plates Optional
Two Variants Available: ADLPS35-150-5: Input: 7-30V, Output: 5V, 5VS, 3.3V ADLPS35-150-12: Input: 14-30V, Output: 5V, 5VS, 3.3V, 12V
Voltage and Current Specifications (common all variants): Maximum Input Current = 15A Maximum Power = 150W Combined Available Output Current: 5VS/5A, 5V/20A, 3.3V/5A, 12V/10A
Input Protection: Overcurrent Overvoltage / Undervoltage / Surge Reverse Voltage
Output Protection: Voltage Out of Range (monitored via PWRGD) Short-circuit
ATX Compliant Signals Available (PS-ON, PWRGD etc.)
Temperature Range: -40C to +85C
Minimal Cooling Required: Chassis Heatspreader or PC/104 Mounting Plate Provide Sufficient Cooling for –40C to +85C Operation
DESCRIPTION
The ADLPS35-150 power supply board is designed to meet the needs of industrial and embedded motherboards by providing robust ATX voltages (5V, 5VS, 3.3V, 12V) in a small form factor power supply designed for -40C to +85C operation. Its small 2”x4” size (50mm x 102mm) allows it to fit many space limited applications. As well, the ADLPS35-150 is tailored to sit sideby-side with our 3.5-inch product line of motherboards and can also be adapted to a PC/104 stack via an optional mounting plate.
The power supply features ATX compliant signaling to allow ACPI/APM power management from within compliant operating systems. At 150 Watts total power and just 50mm x 102mm in size, this small and rugged power supply will fit into most embedded applications. The ADLPS35-150 is available in two variants, one allowing an input voltage range of 7-30V but providing only the 5V, 5VS, and 3.3V outputs, the other with a narrower input voltage range of 14-30V but providing 5V, 5VS, 3.3V and12V outputs.
The board is protected against many types of input power anomalies, such as over-currents, voltage deviations and voltage surge. Short bursts of over-current are simply filtered out. Should overvoltage or under voltage situation persist too long, the power supply shuts off. Noise interference is dampened by up to 35dB. The output is protected against reverse voltage and short-circuit.
Ordering Information
Item Codes    Part#    Description
ADLPS35-150-5    293023    ADLPS35-150-5, 5V, 5VS, 3.3V, ET
ADLPS35-150-12    293024    ADLPS35-150-12, 5V, 5VS, 12V, 3,3V, ET
Accessories
ADLPS35-150- 104CFMT    201-2550    ADLPS35-150-104CFMT Combo PS/CFAST 104 Mounting plate
ADLPC35-150-HSP    293027    ADLPS35-150 Heat spreader for chassis mount
ADLPS35CB-XPWR-5    100-9870    ADLPS35-150, 16P to 10P uFit conn, 5V ATX Power Cable
ADLPS35CB-XPWR-12    100-9871    ADLPS35-150, 16P to 10P uFit conn, 5V/12V ATX Power Cable
ADLPS-WDMLR1X8ST    293028    Input power terminal block, 1x8 screw term
Мин. температура
-40
Макс. температура
+85
Функции
Блок/модуль/конвертер питания